START-INFO-DIR-ENTRY
* gnuit: (gnuit).         GNU Interactive Tools
END-INFO-DIR-ENTRY

	^CM = CHMOD; chmod %s{New mode of %i: ,%m} %i;;;;y

	^CbM = B-CHMOD; chmod %s{New mode of %i: ,%m} %i&;;;;y

	^CrM = R-CHMOD; chmod -R %s{New mode of %i: ,} %i;;;;y

	^CbrM = B-R-CHMOD; chmod -R %s{New mode of %i: ,} %i&;;;;y

function g
{
    gitfm -p $ 3> /tmp/gitfm.p.$$

    if test -s /tmp/gitfm.p.$$; then
	if test -d "`cat /tmp/gitfm.p.$$`"; then
	    cd "`cat /tmp/gitfm.p.$$`"
	else
	    cd
	fi
    fi

    rm -f /tmp/gitfm.p.$$
}

Enlarges the other panel to use the entire screen.  It also changes the
minor mode to ‘Enable all’.  The current panel will become
invisible (‘enlarge-other-panel’).

Enlarges the current panel to use the entire screen.  It also changes
the minor mode to ‘Enable all’.  The other panel will become
invisible (‘enlarge-panel’).

Switches back to the two panel mode (‘two-panel-mode’).

Switches to the tty mode (no panels on the screen) (‘tty-mode’).

Display the entry owner and group (‘panel-enable-owner-group’).

Display the entry date and time (‘panel-enable-date-time’).

Display the entry size (‘panel-enable-size’).

Display the entry size, scaled (e.g. ‘123M’) (‘panel-enable-abbrevsize’).

Display the entry mode (‘panel-enable-mode’).

Display the entry full name (‘panel-enable-full-name’).

Display the entire information about file (‘panel-enable-all’).
This mode is only available if the panel has been enlarged to use the
entire screen with ‘enlarge-panel’ or ‘enlarge-other-panel’
(‘panel-enable-all’).

Switches to the next panel minor mode (‘panel-enable-next-mode’).

Display the panel entries sorted by their names
(‘panel-sort-by-name’).

Display the panel entries sorted by their extensions
(‘panel-sort-by-extension’).

Display the panel entries sorted by their sizes
(‘panel-sort-by-size’).

Display the panel entries sorted by their ‘last modified’ stamps
(‘panel-sort-by-date’).

Display the panel entries sorted by their modes
(‘panel-sort-by-mode’).

Display the panel entries sorted by their owner ids
(‘panel-sort-by-owner-id’).

Display the panel entries sorted by their group ids
(‘panel-sort-by-group-id’).

Display the panel entries sorted by their owner names
(‘panel-sort-by-owner-name’).

Display the panel entries sorted by their group names
(‘panel-sort-by-group-name’).

Switch to the next panel sort method (‘panel-sort-next-method’).

Move the cursor vertically up one entry (‘previous-line’).

Move the cursor vertically down one entry (‘next-line’).

Move the cursor on the first entry in the panel
(‘beginning-of-panel’).

Move the cursor on the last entry in the panel (‘end-of-panel’).

Move the cursor vertically down one page (‘scroll-down’).

Move the cursor vertically down one page (‘scroll-up’).

Scroll the panel entries to the left (‘horizontal-scroll-left’).

Scroll the panel entries to the right (‘horizontal-scroll-right’).

In order to optimize the screen output, you can modify the scroll step
(‘set-scroll-step’).  This is the number of lines to try scrolling
a panel when the cursor moves out.  The ‘StartupScrollStep’
specifies the initial scroll step, but using ‘set-scroll-step’ you
can dynamically change it.

Move the cursor in the other panel (‘other-panel’).

Switch the two panels.  This command works even when gitfm is not
in the ‘two panels’ mode (‘switch-panels’).

Toggle the ‘selected’ flag of the current entry
(‘select-entry’).

Select (marks) all the files matching at least one pattern from a space
separated list of shell patterns.  Spaces and \s are allowed in the
patterns but they have to be escaped with a \.  The user will be
prompted for a pattern to match against
(‘select-files-matching-pattern’).

Unselect (unmarks) all the files matching at least one pattern from a
space separated list of shell patterns.  Spaces and \s are allowed in
the patterns but they have to be escaped with a \.  The user will be
prompted for a pattern to match against
(‘unselect-files-matching-pattern’).

Select (marks) all the files having the same extension as the current
file.  If the current file name doesn't have an extension or starts with
a dot, no files are selected (‘select-extension’).

Unselect (unmarks) all the files having the same extension as the
current file.  If the current file name doesn't have an extension or
starts with a dot, no files are unselected (‘unselect-extension’).

Incremental search forward a file name in the current panel
(‘isearch-forward’).  Pressing ^S or ^Xs again will
force gitfm to go to the next entry that matches the current
isearched string.  When the end of the panel is reached, the isearch is
restarted from its beginning.

Incremental search backward a file name in the current panel
(‘isearch-backward’).  Pressing ^R or ^Xr again will
force gitfm to go to the next entry that matches the current
isearched string.  When the beginning of the panel is reached, the
isearch is restarted from its end.

Copy the current entry name into the input line at the current point
position (‘entry-to-input-line’).

Copy the other panel path into the input line at the current point
position (‘other-path-to-input-line’).

Copy the names of all the selected entries into the input line at the
current point position (‘selected-entries-to-input-line’).

Move the point backward one character (‘backward-char’).

Move the point forward one character (‘forward-char’).

Move the point one word backward (‘backward-word’).

Move the point one word forward (‘forward-word’).

Move the cursor at the beginning of the input line (‘beginning-of-line’).

Move the cursor at the end of the input line (‘end-of-line’).

Delete the character under the cursor (‘delete-char’).

Delete the character before the cursor (‘backward-delete-char’).

Delete backward one word (‘backward-kill-word’).

Delete forward one word (‘kill-word’).

Delete the entire line (‘kill-line’).

Delete all the characters between the beginning of the input line and
the point (‘kill-to-beginning-of-line’).

Delete all the characters between the point and the end of the input
line (‘kill-to-end-of-line’).

Delete all the spaces around the point, leaving only one space
(‘just-one-space’).

Delete all the spaces around the point
(‘delete-horizontal-space’).

Save the region between the point and the mark into the kill "ring" and
then kills it (‘kill-region’).  Note that there is no real
kill-ring here.  The so-called kill-ring has only one entry.

Save the region between the point and the mark without killing it
(‘kill-ring-save’).

Convert the following word to lower case, moving over.
(‘downcase-word’).

Convert the following word to upper case, moving over.
(‘upcase-word’).

Capitalize the following word, moving over.
(‘capitalize-word’).

Walk backward through the history of previously entered strings
(‘previous-history-element’).

Walk forward through the history of previously entered strings
(‘next-history-element’).

Set the mark at the current point position (‘set-mark’).

Exchange the current point position with the mark one
(‘exchange-point-and-mark’).

Reinsert a previously killed text at the current point position
(‘yank’).

Copy the currently selected entries to the user supplied path
(‘copy’).

Copy the currently selected entries to the user supplied path.  The
operation is performed in background (‘B-COPY’).

Move the currently selected entries to the user supplied path
(‘move’).

Move the currently selected entries to the user supplied path.  The
operation is performed in background (‘B-MOVE’).

Delete the currently selected entries (‘delete’).

Delete the currently selected entries.  The operation is performed in
background (‘B-DELETE’).

Create a hard link from the current files to a user supplied file
name (‘LINK’).

Create a hard link from the current files to a user supplied file name
(‘B-LINK’).  The action is performed in background.

Create a symbolic link from the current files to a user supplied file
name (‘SYMLINK’).

Create a symbolic link from the current files to a user supplied file
name (‘B-SYMLINK’).  The action is performed in background.

Rename the current file or directory with the user supplied name
(‘RENAME’).

Rename the current file or directory with the user supplied name.  The
operation is performed in background (‘B-RENAME’).

Change the name of all the selected entries to lowercase.
(‘name-downcase’).

Change the name of all the selected entries to uppercase.
(‘name-upcase’).

Split the current file into several smaller files of a given size and
named based on a given prefix (‘SPLIT’).

Split the current file into several smaller files of a given size and
named based on a given prefix.  The operation is performed in background
(‘B-SPLIT’).

Pack the files into the smallest number of bins.  This is an
approximation - the problem is NP-complete and no known algorithm can
guarantee a solution better than ‘(11/9) * OPTIMAL + 4’.

To make things even worse, for large files, there is no portable way
to predict how many blocks the file system implementation will require
for indirect blocks, directories, etc.  So keep in mind that this is
only an approximation.

Bin packing can be useful when you want to put a bunch of files on
floppies or zip disks and you want to optimize things a little bit
(‘bin-packing’).

‘gitfm’ assumes that you want to pack all the files in the current
directory - if there is any selected file in that directory it will be
unselected first.  Then ‘gitfm’ will ask for a bin size, and select
the files that should go in the first bin.  You are supposed to place
those files in the first bin (e.g. a tar archive), remove them from the
current directory, then run ‘bin-packing’ again, to obtain the list
of the files that should go into the second bin, etc.

Change the mode of the currently selected entries (‘CHMOD’).

Change the mode of the currently selected entries.  The operation is
performed in background (‘B-CHMOD’).

Recursively change the modes of the selected entries if one of them is a
directory (‘R-CHMOD’).

Recursively change the modes of the selected entries if one of them is a
directory.  The operation is performed in background (‘B-R-CHMOD’).

Change the owner of the currently selected entries (‘CHOWN’).

Change the owner of the currently selected entries.  The operation is
performed in background (‘B-CHOWN’).

Recursively change the owners of the selected entries if one of them is
a directory (‘R-CHOWN’).

Recursively change the owners of the selected entries if one of them is
a directory.  The operation is performed in background
(‘B-R-CHOWN’).

Change the group of the currently selected entries (‘CHGRP’).

Change the group of the currently selected entries.  The operation is
performed in background (‘B-CHGRP’).

Recursively change the groups of the selected entries if one of them is
a directory (‘R-CHGRP’).

Recursively change the groups of the selected entries if one of them is
a directory.  The operation is performed in background
(‘B-R-CHGRP’).

Call the default editor with the current file name as an argument
(‘EDIT’).

Call the default editor with the selected entry names as arguments
(‘MULTIPLE-EDIT’).

Create a new file by calling the default editor with the user supplied
file name as an argument (‘FILE-CREATE’).

Call the default editor in order to edit the ‘ChangeLog’ file
(‘CHANGE-LOG’).

Call the default viewer (gitview) with the current file name as
argument (‘VIEW’).

Call the default pager (more) with the currently selected entry
names as arguments (‘MULTIPLE-VIEW’).

Compress the currently selected entries with gzip
(‘COMPRESS’).

Compress the currently selected entries with gzip.  The operation
is performed in background (‘B-COMPRESS’).

Uncompress the currently selected entries with gunzip
(‘UNCOMPRESS’).

Uncompress the currently selected entries with gunzip.  The
operation is performed in background (‘B-UNCOMPRESS’).

Uncompress the currently selected entries with gunzip
(‘F-UNCOMPRESS’).  Force uncompression of links.

Uncompress the currently selected entries with gunzip.  Force
uncompression of links.  The operation is performed in background
(‘BF-UNCOMPRESS’).

Compress the currently selected entries with bzip2
(‘BZIP2-COMPRESS’).

Compress the currently selected entries with bzip2.  The
operation is performed in background (‘B-BZIP2-COMPRESS’).

Uncompress the currently selected entries with bunzip2
(‘BZIP2-UNCOMPRESS’).

Uncompress the currently selected entries with bunzip2.  The
operation is performed in background (‘B-BZIP2-UNCOMPRESS’).

Encode the currently selected file (‘UUENCODE’).

Encode the currently selected file.  The operation is performed in
background (‘B-UUENCODE’).

Decode the currently selected file (‘UUDECODE’).

Decode the currently selected file.  The operation is performed in
background (‘B-UUDECODE’).

Encode the currently selected file using mpack (‘MIME-PACK’).

Encode the currently selected file using mpack.  The operation is
performed in background (‘B-MIME-PACK’).

Decode the currently selected file using munpack (‘MIME-UNPACK’).

Decode the currently selected file using munpack.  The operation is
performed in background (‘B-MIME-UNPACK’).

Encrypt (using pgp) the current file (‘ENCRYPT’).

Decrypt (using pgp) the current file (‘DECRYPT’).

Compare (using diff) the current ASCII file with the other
panel's current file (‘DIFF’).  If both entries are directories, a
recursive diff is performed.

Compare (using diff) the current ASCII file with its latest
backup.  The latest backup is the file having the same name and a '~' at
the end (‘LAST-BACKUP-DIFF’).

Compare the current file with the other panel current file.  A binary
comparison is performed (‘compare’).

Run the ispell command with the current file name as an
argument.

Print the selected files via lpr to the user specified printer or
to the default one if no lpr options are given (‘PRINT-JOB’).

Print the list of active printing jobs via lpq.  The default
printer is queried if no lpq options are given
(‘PRINT-JOB-LIST’).

Call gitwipe to wipe the selected files.  Asks for confirmation
before actually wiping them in order to avoid errors (‘WIPE’).

Search files on the file system, starting from the current directory
(‘FIND’).

Use 'locate' to search files on the file system, starting from the
current directory (‘LOCATE’).

Locate the binary, source, and manual page files for a command
(‘WHEREIS’).

Locate a command; display its pathname or alias (‘WHICH’).

Create a tar archive containing all the currently selected
entries (‘TAR’).

Create a tar archive containing all the currently selected
entries.  The operation is performed in background (‘B-TAR’).

Create a compressed tar archive containing the current entry,
provided it is a directory (‘TAR-COMPRESS’).

Create a compressed tar archive containing the current entry,
provided it is directory.  The operation is performed in background
(‘B-TAR-COMPRESS’).

Create a bzip2 compressed tar archive containing the current
entry, provided it is a directory (‘TAR-BZIP2’).

Create a bzip2 compressed tar archive containing the current
entry, provided it is a directory.  The operation is performed in
background (‘B-TAR-BZIP2’).

Expand the selected archives into the current directory.  The utility
used is selected based on the extension of the file
(‘GENERIC-UNPACK’).

Expand the selected archives into the current directory.  The utility
used is based on the extension of the file.  The operation is performed
in background (‘B-GENERIC-UNPACK’).

Expand the se